Yamaha NAVIGO Скачать руководство пользователя

Страница: 90 / 125

10.3. Storing the Wheelchair

(1) Apply the parking brakes

and set the left and right

clutch levers in the power

drive position.

(2) Turn off the power and

remove the battery.

(3) Store the wheelchair indoors where there is

less humidity.

(4) To wipe off dirt or spots before storing, use a

tightly wrung-out towel.

(5) If the wheelchair will not be used for more

than 3 months, inflate the tires to the speci-

fied pressure, install the battery, and confirm

that the wheelchair operates correctly every 3

months.

WARNING

● Be sure to remove the battery when not in use, so that its power will not turn on unexpect

edly in storage.

● Be sure to store the disconnected battery with the protective

cap on it. Exposed contacts can cause short circuits and

lead to a fire or battery rupture.

Protective cap

When storing the battery for a long period of time, see sections below, and observe

the cautionary notes.

• For the nickel metal hydride battery

“8.2. (3) Storing the battery”

• For the lithium ion battery

“9.2. (3) Storing the battery”

TIP

Please refer to the Warnings in “1.5.16. Transporting and Storing the Wheelchair” on pages 20 to 21.

Содержание NAVIGO






























































































































Результаты поиска

Содержание NAVIGO

Отзывы:

Похожие инструкции для NAVIGO

Бренды по названию

Популярные бренды

Yamaha NAVIGO, Руководство пользователя

Результаты поиска

Содержание NAVIGO

Отзывы:

Похожие инструкции для NAVIGO

Бренды по названию

Популярные бренды