Yamaha NAVIGO Скачать руководство пользователя страница 41

Страница: 41 / 125

(7) Assistant controller (optional)

Check the assistant controller to ensure that it is firmly

secured to the wheelchair. (Try shaking and rocking the

assistant controller.)

Check the switches to ensure that it is in an easy-to-op-

erate position.

(8) Battery bag (optional)

Make sure that the left and right cable connectors are securely connected.

Make sure that the entire surfaces of the fasteners on the upper straps and lower fixing belt are ad

hered completely and securely.

Make sure that the upper straps and lower fixing belt are not loose, and do not have any slack.

(9) Foot supports

Make sure that the clearance between the foot supports and the ground is 2 inch (5 cm) or more.

Adjust the height of the foot supports to make 2 inch (5 cm) or more clearance.

WARNING

● Set the height of the foot supports so that the clear

ance between the foot supports and the ground is

2 inch (5 cm) or more. If the foot supports are too

low, the foot supports may come in contact with

bumpy ground or objects on the ground, possibly

causing the wheelchair to tip over.

Assistant controller

Controller

Greater than

2 inch (5 cm)

(6) Controller

Check the controller to ensure that it is firmly secured to the wheelchair. (Try shaking and rocking the

controller.)

Check the joystick to ensure that it is in an easy-to-operate position.

WARNING

● If the air pressure in the rear tires decreases, the parking brakes may become ineffective.

Always keep the air pressure in the rear tires at the correct level.

● Continuing to use the wheelchair with a problem in the wheelchair body or the wheels may

cause sudden damage to the wheelchair while traveling, and may result in a rollover or fall.

● If you find any unusual condition on the wheelchair in these inspections, contact your deal

er.

Содержание NAVIGO






























































































































Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды

Yamaha NAVIGO, Руководство пользователя

Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды