background image

73

9

(2)  Battery’s deterioration characteristics
 

All batteries are consumables. A battery gradually deteriorates and its capacity decreases over time 

and with use.

 

The extent to which the capacity decreases by deterioration depends on the use conditions.

(3)  The life of the lithium ion battery

 

The life of the lithium ion battery (ESB1) is 8 years from its initial charging, or 8,000 Ah of integral 

charge capacity.

For a lithium ion battery, its capacity will decrease to approximately 60% of that of a new bat

-

tery after 700 charge cycles, under normal use.

TIP

 

Even if a battery is not used, when it is stored over a long period of time, it will deteriorate and its ca-

pacity will decrease.

 

When you are using multiple batteries, alternate between the batteries.

Immediately after the lithium ion battery has successfully completed charging (fully charged), 

pushing the indicator switch will always show all 5 lamps lit. Even if deterioration has pro

-

gressed, all 5 lamps should turn on when fully charged. This display format was adopted for 

this battery, as the rate of deterioration of lithium ion batteries is gradual.

TIP

•  Battery life alert

  The capacity indicator lamps start alerting you from 3 

months prior to the battery becoming no longer charge-

able due to its end-of-life, or when the integral charge 

capacity reaches 7,800 Ah.

  When charging has completed and the charger plug is 

unplugged, the capacity indicator lamps turn on and off 

as shown in the figure on the right.

The capacity lamps 

turn on and off re

-

peatedly for 5 sec

-

onds, in the order of 

the arrows.

•  When the battery reaches end of life

  Once the battery reaches its end of life, the lamp on the charger will not turn on when attempting to 

charge the battery. Moreover, the battery’s capacity indicator lamps no longer turn on and the bat-

tery cannot be charged.

Содержание NAVIGO






























































































































Отзывы: