Yamaha NAVIGO Скачать руководство пользователя страница 55

Страница: 55 / 125

5.2. Removing the Battery

Disconnect the battery from the wheelchair.

Store the battery with the protective cap on it.

<How to remove a nickel metal hydride (Ni-MH) battery>

<How to remove a lithium ion (Li-ion 00) battery>

Turn off the power switch.

Disconnect the battery by pulling
it straight outwards while press-
ing the release button.

Stand the grip upright.

Disconnect the battery by pull-

ing it straight outwards. (Do not
pull it out on an angle.)

Store the battery with the

protective cap on it.

Store the battery with the

protective cap on it.

Protective cap

WARNING

● Be sure to store the disconnected battery with the pro

tective cap on it. Exposed contacts can cause short cir

cuits and lead to a fire or battery rupture.

Protective cap

Содержание NAVIGO






























































































































Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды

Yamaha NAVIGO, Руководство пользователя

Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды