Yamaha NAVIGO Скачать руководство пользователя страница 85

Страница: 85 / 125

9.5. The Temperature of the Lithium Ion Battery (ESB1)

during Charging

Charge the battery in an environment with a temperature of

50 to 77°F (10 to 25°C).

• To protect the battery, if the internal temperature of the battery is

under 32°F (0°C) or over 104°F (40°C), charging does not start.

Instead, it enters a standby mode. During this time, the charge

lamp (green) flashes.

While in standby mode, when the battery reaches an appropri-

ate temperature, the charge lamp (green) will change from a

flashing to an “on” state, and charging will start automatically. (The length of the standby time varies with the condi

tions.)

•

The battery temperature increases during charging. However, if the battery temperature rises above 113°F (45°C),
the power for the charger will turn off to protect the battery.

Since charging has not ended, it is necessary to charge again after the battery temperature has decreased.

Charging a battery immediately after travel, or charging a new battery is likely to cause its temperature to increase,

which increases the likelihood of the charger stopping charging before completion.

Charge lamp

Содержание NAVIGO






























































































































Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды

Yamaha NAVIGO, Руководство пользователя

Результаты поиска

Содержание NAVIGO

Отзывы:

Бренды по названию

Популярные бренды