4
MY8-LAKE Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
* Please keep this manual in a safe
place for future reference.
WARNING
Always follow the basic precautions listed below
to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting,
damages, fire or other hazards. These
precautions include, but are not limited to, the
following:
• Do not install the card in any Yamaha products not
specified by Yamaha for use with the card to avoid
possible electrical shock, fire, or equipment damage.
• Do not attempt to disassemble or modify the card. Do
not apply excessive force to card connectors or other
card components. Mishandling of the card may lead to
shock, fire hazard, or equipment failure.
• Be sure to disconnect the power cable of the host
device before installing the card and connecting/
disconnecting the cables (in order to eliminate shock
hazard, undesired noise, and avoid equipment
damage).
• Turn off all peripheral devices connected to the host
device before installation, and unplug all related cables
(in order to eliminate shock hazard, undesired noise,
and avoid equipment damage).
CAUTION
Always follow the basic precautions listed below
to avoid the possibility of physical injury to you or
others, or damage to the device or other
property. These precautions include, but are not
limited to, the following:
• Be sure to properly ground the host device to prevent
electrical shock and/or malfunction.
• Do not touch the metallic leads (pins) of the circuit
board when handling the card. The pins are sharp and
may cause hand cuts.
• Wear a pair of heavy gloves during installation to avoid
scratching or cutting your hands on sharp edges.
• Avoid touching exposed connectors and metal parts to
minimize the possibility of bad connections.
• Drain all static electricity from your clothing and body
before handling the card. Static electricity can damage
the card. Touch an exposed metal part of the host
device or other grounded object beforehand.
• Do not drop the card or subject it to physical shock as
this can result in breakage and/or malfunction.
• Do not drop screws or other small parts inside the
card. If power is applied while screws or similar metal
objects are loose inside the unit the card may
malfunction or be damaged. If you cannot retrieve
dropped objects yourself, refer the problem to qualified
Yamaha service personnel.
• The illustrations as shown in this manual are for
instructional purposes only, and may be different from
the ones on your equipment.
• Lake is a registered trademark of Lab.gruppen AB.
• Windows is a registered trademark of Microsoft
®
Corporation in the United States and other countries.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
European models
Purchaser/User Information specified in EN55103-1 and
EN55103-2.
Conforms to Environments: E1, E2, E3 and E4
Yamaha cannot be held responsible for damage
caused by improper use or modifications to the
device, or data that is lost or destroyed.
