Yamaha MTN1000 2016, Руководство по обслуживанию

Страница: 553 / 658

CRUISE CONTROL SYSTEM
8-136
B-1 Locate the malfunction. Execute the diagnostic mode.
(Code 80)
When the cruise control setting
switch “RES+” is pushed: “ON”
When the cruise control setting
switch is released: “OFF”
Malfunction

Go to item A-2
for the cruise control setting
switch “RES+”.
Execute the diagnostic mode.
(Code 81)
When the cruise control setting
switch “SET–” is pushed: “ON”
When the cruise control setting
switch is released: “OFF”
Malfunction

Go to item B-2.
B-2 Connection of left handlebar
switch coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected

Con-
nect the coupler securely or
replace the wire harness.
Turn the main switch to “ON”.
Push and release the “SET–”
side of the cruise control setting
switch, and then check the con-
dition of the fault code using the
malfunction mode of the
Yamaha diagnostic tool.
Condition is “Recovered”

Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”

Go to
item B-3.
B-3 Connection of main switch cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected

Con-
nect the coupler securely or
replace the wire harness.
Turn the main switch to “ON”.
Push and release the “SET–”
side of the cruise control setting
switch, and then check the con-
dition of the fault code using the
malfunction mode of the
Yamaha diagnostic tool.
Condition is “Recovered”

Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”

Go to
item B-4.
B-4 Connection of ECU coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected

Con-
nect the coupler securely or
replace the wire harness.
Turn the main switch to “ON”.
Push and release the “SET–”
side of the cruise control setting
switch, and then check the con-
dition of the fault code using the
malfunction mode of the
Yamaha diagnostic tool.
Condition is “Recovered”

Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”

Go to
item B-5.
Fault code No. P0564
Item
A Cruise control setting switch “RES+”: open or short circuit is
detected.
B Cruise control setting switch “SET–”: open or short circuit is
detected.