Yamaha MOXF8 Скачать руководство пользователя страница 96

Страница: 96 / 163

MOXF6/MOXF8 Reference Manual

Song Mode

Song Record Standby

During Song Recording

Supplementary Information

05: Normalize Play Effect

This Job rewrites the data in the selected Track so that it incorporates the current Grid Groove settings.

TR (Track)

Determines the Song Track to which the Job is applied.

Settings:

01 – 16, all

06: Divide Drum Track

Separates the note events in a drum performance assigned to a specified Track, and places the notes corresponding to

different drum instruments in separate Tracks (Tracks 1 through 8).

TR (Track)

Determines the Song Track to which the Job is applied.

Settings:

01 – 16

07: Put Track To Arp (Put Track to Arpeggio)

This Job copies data in the specified measures of a Track for creating Arpeggio data. For details, see

page 126

08: Copy Phrase

This Job copies the Phrase (created in the Pattern mode) to a specified track of the current Song.

NOTICE

This Job overwrites any data already existing in the destination track with the exception of the Mixing setup.

Pressing this calls up the selected Job display.

01: Copy Song

This Job copies all data from a selected source Song to a

selected destination Song. The Mixing Voices used by the

source Song are also copied.

NOTICE

This Job overwrites any data already existing in the destination

Song.

02: Split Song To Pattern

This Job allows you to copy a part of the current Song—all 16

Tracks over a specific range of measures.

NOTICE

This Job overwrites any data already existing in the destination

Pattern and Section.

03: Clear Song

This job deletes all data (including the Mixing Voices) from the selected Song or all Songs. It can also be used to delete

all 64 Songs at the same time.

04: Song Name

This Job lets you assign a name to the selected Song. For detailed instructions on naming, see the “Basic Operation” of

the Owner’s Manual.

[F6] SONG (Song Job)

Source Song

Destination Song

Source Song range (in measures)

Destination Pattern and Section

Содержание MOXF8




































































































































































Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды

Yamaha MOXF8, Справочное руководство

Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды