background image

PERF

SONG

PATTERN

MIX

MASTER

REMOTE

UTILITY

QUICK SET

FILE

VOICE

MOXF6/MOXF8 Reference Manual

Pattern Mode

Pattern Play

[F1] PLAY

[F2] GROOVE

[F3] TRACK

[F4] PATCH

[F5] REMIX

[F6] CHAIN

Pattern Record

Pattern Record Standby

[F1] SETUP

[F2] VOICE

[F3] ARP ED

[F5] CLICK

During Pattern Recording

[F1] SETUP

[F3] RESET

[F4] TIE

[F5] DELETE

[F6] BAK DEL

Pattern Edit

[F1] CHANGE

[F2] VIEW FLT

[F5] INSERT

[F6] DELETE

Pattern Job

[F1] UNDO/REDO

[F2] NOTE

[F3] EVENT

[F4] PHRASE

[F5] TRACK

[F6] PATTERN

Supplementary Information

102

From this display, you can assign a Preset Phrase or a User Phrase (recorded in the Pattern Record mode) to each 

Track and create a Pattern that contains up to 16 Tracks. You can assign a User Phrase created with the currently 

selected Pattern. If you wish to use User Phrases recorded to Tracks of other Patterns, use the Phrase Data Copy 

function, selected with the [SF6] COPY button.

1

Phrase Number

Determines the Phrase number to be assigned to a Track. You can select one of the 256 User Phrases stored to the 

selected Pattern. Note that by default the User Phrases have no data.

When set to “---,” the Track becomes empty.

Settings:

--- (off), 001 – 256

NOTE

The MOXF6/MOXF8 features no Preset Phrase data.

2

Number of Measures

Indicates the name of the selected Phrase.

3

Section

Shows the Section being currently edited. To change the Section, press the [PATTERN SECTION] button, and then use 

the Number [1] – [16] buttons. Pressing the [PATTERN SECTION] assigns the Sections A – P to numbers [1] – [16] in 

sequence. Then, pressing the appropriate Number [1] – [16] buttons lets you change the Section.

4

Meas (Measure)

Shows Measure and Beat for current playback location.

[SF5] CLEAR

This clears the Phrase assignment to the currently selected Track and leaves the Track empty.

[SF6] COPY

The User Phrases that can be assigned with the Patch function are limited to the ones contained in the currently 

selected Pattern. This function lets you copy Phrases in another Pattern to the selected one. Press the [SF6] to call up 

the following display. After setting the parameters as needed, press the [ENTER] to copy the Phrase data.

NOTICE

Any previous data in the copy destination will be overwritten. Therefore, you should regularly create backup copies of important 

data on a USB flash-memory device or the like.

[F4] PATCH

1

2

3

4

Source Pattern number, Phrase number

Destination Phrase and Track of the Pattern being currently edited

Содержание MOXF8




































































































































































Отзывы: