Yamaha MOXF8 Скачать руководство пользователя страница 140

Страница: 140 / 163

MOXF6/MOXF8 Reference Manual

Utility Mode

140

Utility Mode

In the Utility mode, you can set parameters that apply to the entire system of the MOXF6/MOXF8. This mode is actually

a sub-mode of the Voice/Performance/Song/Pattern mode. Press the [UTILITY] button in each mode to enter the Utility

mode and press the [EXIT] button after making settings to go back to the previous mode.

[SF1] TG (Tone Generator)

From this section, you can make overall settings for the internal tone generator. The settings here only affect the internal

tone generator block. The MIDI output will not be affected.

Volume

Determines the overall volume of the instrument.

Settings:

0 – 127

NoteShift

Determines the amount (in semitones) by which the pitch of all notes is shifted.

Settings:

-24 – +0 – +24

Tune

Determines the fine tuning of the MOXF6/MOXF8’s overall sound (in 0.1 cent steps).

Settings:

-102.4 – +0.0 – +102.3

SystemFxOn/OffBtn Chorus (System Effect On/Off Button Chorus)

Determines whether or not the System Effect (Chorus) is actually applied when the EFFECT ON/OFF [SYSTEM] button is

turned on.

Settings:

off, on

SystemFxOn/OffBtn Reverb (System Effect On/Off Button Reverb)

Determines whether or not the System Effect (Reverb) is actually applied when the EFFECT ON/OFF [SYSTEM] button is

turned on.

Settings:

off, on

[SF2] OUTPUT

L&R Gain

Determines the output gain of the OUTPUT [L/MONO] and [R] jacks.

Settings:

0dB, +6dB

USB 1/2 Gain
USB 3/4 Gain

Determines the output gain of the USB 1/2 channels or USB 3/4 channels.

Settings:

0dB, +6dB

[SF3] KBD (Keyboard)

From this display you can set the keyboard-related parameters. The settings here affect the MIDI messages generated

by playing the keyboard.

Octave

Determines the amount in octaves by which the range of the keyboard is shifted up or down. This parameter is linked

with the OCTAVE [-]/[+] buttons on the panel.

Settings:

-3 – +0 – +3

Transpose

This parameter is used to transpose the current zone in units of one semitone.

Settings:

-11 – +0 – +11

NOTE

If you transpose beyond the note range limits (C -2 and G8), notes in the adjacent octaves will be used.

Operation

Press the [UTILITY] button.

[F1] GENERAL

Содержание MOXF8




































































































































































Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды

Yamaha MOXF8, Справочное руководство

Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды