Yamaha MOXF8 Скачать руководство пользователя страница 89

Страница: 89 / 163

MOXF6/MOXF8 Reference Manual

Song Mode

Song Record Standby

During Song Recording

Supplementary Information

04: Crescendo

This Job lets you create a crescendo or decrescendo over the specified range of notes. (Crescendo is a gradual

increase in volume, and decrescendo is a gradual decrease.)

TR (Track) 001 : 1 : 000 – 999 : 4 : 479

Determines the Track (01 – 16, all) and range of measures/beats/clocks over which the Job is applied.

VelocityRange

Determines the intensity of the crescendo or decrescendo. The velocity values of the notes in the specified range are

gradually increased or decreased starting at the first note in the range. The velocity of the last note in the range

becomes the original velocity of the note plus the Velocity Range value. If the resultant velocity is outside the 1 – 127

range, it is set to 1 or 127 accordingly. Settings greater than 0 produce a crescendo, and settings less than 0 produce a

decrescendo. A setting of 0 produces no effect.

Settings:

-127 – +0 – +127

NOTE

Executing this Job changes velocities of the note on events in the specified range to produce the crescendo/decrescendo. Note

that this Job cannot apply the crescendo/decrescendo to long sustained notes having a long gate time. If you wish to do this,

use the “Create Continuous Data” Job (

page 92

) with the Event Type set to “Control Change 11.”

05: Transpose

Transpose lets you change the key or pitch of the notes in the specified range.

TR (Track) 001 : 1 : 000 – 999 : 4 : 479

Determines the Track (01 – 16, all) and range of measures/beats/clocks over which the Job is applied.

Note

Determines the range of note pitches over which the Job is applied. You can also set the note directly from the

keyboard, by holding down the [SF6] KBD button and pressing the desired key.

Settings:

C -2 – G8

Transpose

Transposes notes in the specified range (in semitones). A setting of +12 transposes up one octave, while a setting of

-12 transposes down an octave. A setting of 0 produces no change.

Settings:

-127 – +0 – +127

06: Glide

The Glide Job replaces all notes following the first note in the specified range with pitch bend data, producing smooth

glides from note to note. This is ideal for producing slide-guitar or string-bending effects.

TR (Track) 001 : 1 : 000 – 999 : 4 : 479

Determines the Track (01 – 16, all) and range of measures/beats/clocks over which the Job is applied.

GlideTime

Determines the time of the glide. Higher values produce a longer glide between notes.

Settings:

000 – 100

PBRange (Pitch Bend Range)

Determines the maximum pitch bend range to be applied by the Glide Job (in semitones).

Settings:

01 – 24

NOTE

Please note that the Song may not play back properly if you set the “PB Range” to a value different from the one set via the Voice

Edit mode. In order that the Song plays back properly, insert the MIDI event below to the corresponding Track in the Song Edit

display (

page 84

RPN [000-000] xxx (“xxx” represents the Pitch Bend value)

07: Create Roll

This Job creates a series of repeated notes (like a drum roll) in the specified range with the specified continuous

changes in clock step and velocity. This is ideal for creating fast staccato rolls and special stuttering effects.

TR (Track) 001 : 1 : 000 – 999 : 4 : 479

Determines the Track (01 – 16) and range of measures/beats/clocks over which the Job is applied.

Содержание MOXF8




































































































































































Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды

Yamaha MOXF8, Справочное руководство

Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды