manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

Editing a Drum Voice

MOTIF XS Owner’s Manual

130

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

3

Wave Bank (Waveform Bank)*

Determines the Waveform Bank assigned to the Drum Key, 
Preset or User. User Waveforms can be created based on 
the samples recorded in the Sampling mode. 

Settings:

PRE (preset waveform), USR (user waveform)

n

For details about Waveform, refer to the explanation of the 
Sampling Mode on page 161. 

4

Wave Category (Waveform Category)*

5

Wave Number (Waveform Number)*

Determines the Waveform assigned to the Drum Key by 
selecting the Waveform Category and Number. For a 
complete list of Waveforms in the Preset Bank, refer to the 
Waveform List in the separate Data List booklet. 

6

Assign Mode*

When this is set to “single,” double playback of the same 
note is prevented. This is useful when two or more 
instances of the same note are received nearly 
simultaneously, or without a corresponding note off 
message. To allow playback of each instance of the same 
note, set this to “multi.” In general, you should probably set 
this to “multi”—especially for tambourine and cymbal 
sounds that you would want to ring out to their full decay, 
when playing them multiple times in succession. Please 
keep in mind that the “multi” setting consumes the overall 
polyphony and it may cause sounds to be cut off. 

Settings:

single, multi

single

When this is set to “single” and double playback of the same note are 
transmitted to the internal tone generator, the first note will be stopped 
then the next note will be sounded. 

multi

When this is set to “multi” and double playback of the same note are 
transmitted to the internal tone generator, all the notes are sounded 
simultaneously. 

7

Receive Note Off

Determines whether or not the selected Drum Key 
responds to MIDI Note Off messages. This should be set to 
on when the selected Drum Key has a sustained, non-
decaying sound (such as a snare roll), so that you can stop 
the sound by releasing the note. 

Settings:

off, on

8

Alternate Group*

Determines the Alternate Group to which the key is 
assigned. In a real drum kit, some drum sounds cannot 
physically be played simultaneously, such as open and 
closed hi-hats. You can prevent keys from playing back 
simultaneously by assigning them to the same Alternate 
Group. Up to 127 Alternate Groups can be defined. You 
can also select “off” here if you wish to allow the 
simultaneous playback of sounds. 

Settings:

off, 1 – 127

9

Ins Effect Output (Insertion Effect Output)

Determines which Insertion Effect (A or B) is used to 
process each individual Drum Key. This parameter is same 
as the Ins Effect Output in the Connect display (page 107) 
in Voice Common Edit. Making a setting here automatically 
changes the setting of that parameter as well. 
When INSERTION CONNECT (

2

) is set to “ins L” in the 

Connect display, Insertion L is used to process each 
individual Drum Key, even if “ins A” or “ins B” is selected. 

Settings:

thru (through), ins A (Insertion Effect A), ins B (Insertion 
Effect B)

)

Reverb Send*

Determines the level of the Drum Key sound (the bypassed 
signal) that is sent to Reverb effect. This is available only 
when Insertion Effect Output (above) is set to “thru.” The 
setting made here will be applied to the same parameters 
in the Connect display (page 107) of the Voice Common 
Edit. 

Settings:

0 – 127

!

Chorus Send*

Determines the level of the Drum Key sound (the bypassed 
signal) that is sent to Chorus effect. This is available only 
when Insertion Effect Output (above) is set to “thru.” The 
setting made here will be applied to the same parameters 
in the Connect display (page 107) of the Voice Common 
Edit. 

Settings:

0 – 127

@

Output Select

Determines the specific output(s) for the individual Drum 
key signal. You can assign each individual Drum Key 
sound to be output from a specific hardware output jack on 
the rear panel. This parameter is useful when you wish to 
apply a connected external effect to a specific drum 
instrument. The setting here is available only when the 
Insertion Effect Output parameter (

9

) is set to “thru.” 

Settings:

See the table below.

n

The mLAN settings (m1 – m14) are available only for the 
MOTIF XS8. The mLAN settings are available for MOTIF XS6/7 
only when an optional mLAN16E2 has been installed. 

LCD

Output jacks

Stereo/Mono

L&R

OUTPUT L and R

Stereo

asL&R

ASSIGNABLE OUTPUT L and R

Stereo

m1&2

mLAN OUTPUT 1 and 2

Stereo (1: L, 2: R)

m3&4

mLAN OUTPUT 3 and 4

Stereo (3: L, 4: R)

m5&6

mLAN OUTPUT 5 and 6

Stereo (5: L, 6: R)

m7&8

mLAN OUTPUT 7 and 8

Stereo (7: L, 8: R)

m9&10

mLAN OUTPUT 9 and 10

Stereo (9: L, 10: R)

m11&12

mLAN OUTPUT 11 and 12

Stereo (11: L, 12: R)

m13&14

mLAN OUTPUT 13 and 14

Stereo (13: L, 14: R)

asL

ASSIGNABLE OUTPUT L

Mono

asR

ASSIGNABLE OUTPUT R

Mono

m1

mLAN OUTPUT 1

Mono

:

:

:

m14

mLAN OUTPUT 14

Mono

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Roli Seaboard RISE 25 Creator Manual preview
Seaboard RISE 25
Бренд: Roli Страницы: 21
Belkin SnapNType F8R0500 User Manual preview
SnapNType F8R0500
Бренд: Belkin Страницы: 15
Mopar 82214480 Manual preview
82214480
Бренд: Mopar Страницы: 17
Acer NITRO NKB810 Quick Start Manual preview
NITRO NKB810
Бренд: Acer Страницы: 8
Brother AX-425 Parts Reference List preview
AX-425
Бренд: Brother Страницы: 26
JVC EXAD KD-AVX55 Instructions Manual preview
EXAD KD-AVX55
Бренд: JVC Страницы: 218
Fujitsu FKB-7681 Series Specifications preview
FKB-7681 Series
Бренд: Fujitsu Страницы: 4
Fujitsu FKB8729 Series Specifications preview
FKB8729 Series
Бренд: Fujitsu Страницы: 8
Lenovo BKC800 Quick Start Manual preview
BKC800
Бренд: Lenovo Страницы: 6
Lenovo LXH-JME8002B User Manual preview
LXH-JME8002B
Бренд: Lenovo Страницы: 6
Lenovo BKF500 Product Information Manual preview
BKF500
Бренд: Lenovo Страницы: 17
Lenovo 73P2635 Overview preview
73P2635
Бренд: Lenovo Страницы: 3
Lenovo Duet 7 BT Folio User Manual preview
Duet 7 BT Folio
Бренд: Lenovo Страницы: 5
Lenovo USB Smartcard Keyboard User Manual preview
USB Smartcard Keyboard
Бренд: Lenovo Страницы: 38
Lenovo Multimedia Remote with Keyboard N5902 Manual preview
Multimedia Remote with Keyboard N5902
Бренд: Lenovo Страницы: 36
Lenovo KB-Q704-1 Quick Start Manual preview
KB-Q704-1
Бренд: Lenovo Страницы: 32
Lenovo Helix Enhanced Dock Manual preview
Helix Enhanced
Бренд: Lenovo Страницы: 2
Lenovo 73P4730 User Manual preview
73P4730
Бренд: Lenovo Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды