4. Screens
MMP1 Operation Manual
22
4-1-6. Speaker Management screen
This is used to set the delay and EQ for signals sent to each speaker.
NOTE
You can use this screen when logged in as an “Administrator” or “Advanced User.”
Speaker Matrix Out
NOTE
• To bring up the context menu, (for Windows) right click a value,
or (for Mac) hold down the <control> key and then click a
value.
• To select multiple cells for copying values to, simultaneously
hold down the right mouse button (Windows) or the <control>
key (Mac) and drag the mouse.
Direct Speaker Send
For selecting input sources to send to each speaker
without going through the speaker matrix. Delay, EQ and
other processing cannot be performed.
This is used to switch between Speaker Sets when the
speaker matrix is being used for another application.
Speaker Set
Displays the Speaker Set to which the
Speaker Matrix Out belongs.
NOTE
You can set the Speaker Set in “Speaker
Matrix” tab of the “Scene” tab on the Settings
screen.
Trim
Double click or use the mouse wheel to
adjust input levels. Out-of-range values
entered will be corrected to the maximum or
minimum value allowed.
Delay
Double click or use the mouse wheel to set
the delay. Out-of-range values entered will be
corrected to the maximum or minimum value
allowed.
EQ 1 – 6
Double click or use the mouse wheel to set
the F (frequency), G (gain), Q, and Type for
the EQ. Out-of-range values entered will be
corrected to the maximum or minimum value
allowed.
Click to select an input source.
NOTE
The same items can be configured on the
“Input Patch” tab on the Patch screen.
