Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 108

Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 62

Operation

57

shifted from neutral to bow up or bow
down.

If the mechanism does not work properly,
have a Yamaha dealer service it.

EJU32650

Jet intake

Carefully check the jet intake for weeds, de-
bris, or anything else that might restrict the in-
take of water. If the jet intake is clogged,
cavitation could occur, reducing jet thrust, and
possibly damaging the jet pump.
In some cases, the engine may overheat be-
cause of lack of cooling water, and damage to
the engine could result. Cooling water is fed to
the engine by the jet pump. (See page 91 for
jet intake cleaning procedures.)

WARNING

EWJ00470

●

Keep away from the intake grate while
the engine is on. Items such as long hair,
loose clothing, or PFD straps can be-

come entangled in moving parts, result-
ing in severe injury or drowning.

●

Stop the engine and remove the clip
from the engine shut-off switch before
removing any debris or weeds, which
may have collected around the jet in-
take.

EJU32660

Engine shut-off cord

Check that the engine shut-off cord is not
frayed or broken. If the cord is damaged, re-
place it; never try to repair it or tie it together.

UF1Y11E0.book Page 57 Wednesday, August 23, 2006 11:43 AM

«
...
60
61
62
63
64
...
»

Содержание FX Cruiser WaveRunner 2007













































































































Отзывы:

Нет отзывов