Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 108

Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 46

Features and functions

41

The fuel level meter has eight segments
which show the amount of fuel remaining in
the fuel tank.

NOTE:

The fuel level is most accurate when the wa-
tercraft is sitting level on a trailer or in the wa-
ter.

EJU35060

Hour meter/voltmeter

NOTE:

To switch the display between the hour meter
and the voltmeter, push the “Volt/Hour” button
for at least 1 second after the meter is dis-
played for more than 10 seconds.

Hour meter

The hour meter is provided to make it easy to
follow the maintenance schedule.

The meter shows the hours of engine opera-
tion that have elapsed since the watercraft
was new.

Voltmeter

The voltmeter is provided to display the volt-
age of the battery.
When the battery voltage is normal, the volt-
meter displays approximately 12 volts.
If the battery voltage is less than 8.0 volts,
“LO” is displayed on the voltmeter and if the
voltage is above 18.1 volts, “HI” is displayed
on the voltmeter. If “HI” or “LO” is displayed,
return to shore and, if necessary, have a
Yamaha dealer check the charging system
and the battery.

EJU35071

Fuel level warning indicator

If the fuel remaining in the fuel tank drops to
about 13 L (3.4 US gal, 2.9 Imp gal), the low-
est two fuel level segments, the fuel level
warning indicator, and the “WARNING” indi-
cator light begin to blink. The buzzer also
starts sounding intermittently.

If this occurs, refill the fuel tank as soon as
possible.
The warning signals will be cleared when the
engine is restarted after the fuel tank is re-
filled.

NOTE:

Press any button on the multifunction meter to
stop the buzzer.

1

Fuel level meter

1

Hour meter/voltmeter

2

“Volt/Hour” button

UF1Y11E0.book Page 41 Wednesday, August 23, 2006 11:43 AM

«
...
44
45
46
47
48
...
»

Содержание FX Cruiser WaveRunner 2007













































































































Отзывы:

Нет отзывов