Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 108

Yamaha FX Cruiser WaveRunner 2007 Скачать руководство пользователя страница 48

Features and functions

43

death could result from coming in contact
with the rotating parts of the jet pump.

CAUTION:

ECJ00040

If you cannot locate and correct the cause
of the overheating, consult a Yamaha deal-
er. Continuing to operate at higher speeds
could result in severe engine damage.

NOTE:

Press any button on the multifunction meter to
stop the buzzer.

EJU35130

Check engine warning indicator

If a sensor malfunction or a short circuit is de-
tected, the “WARNING” indicator light and the

check engine warning indicator begin to blink,
and the buzzer sounds intermittently.

If this occurs, reduce the engine speed, return
to shore, and have a Yamaha dealer check
the engine.

NOTE:

Press any button on the multifunction meter to
stop the buzzer.

EJU35141

Storage compartments

A front storage compartment, glove compart-
ment, seat storage compartment, watertight
compartment, and beverage holder are pro-
vided.

NOTE:

●

Make sure that the storage compartments
are closed securely before operating the
watercraft.

●

The front storage compartment, glove com-
partment, and seat storage compartment
are not designed to be watertight. If you car-
ry objects that must be kept dry, such as the
manuals, put them in a waterproof bag or
the watertight compartment.

EJU35151

Front storage compartment

The front storage compartment is located at
the bow.

UF1Y11E0.book Page 43 Wednesday, August 23, 2006 11:43 AM

«
...
46
47
48
49
50
...
»

Содержание FX Cruiser WaveRunner 2007













































































































Отзывы:

Нет отзывов