
Operation
61
EMU31742
Stopping boat
WARNING
EWM01510
●
Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or im-
pact the steering wheel or other parts of
the boat. This could increase the risk of
serious injury. It could also damage the
shift mechanism.
●
Do not shift into reverse while traveling
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle.
The stopping distance varies depending on
gross weight, water surface conditions, and
wind direction.
EMU30880
Trolling
EMU30890
Adjusting trolling speed
The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.
To increase the trolling speed, press the “
”
switch.
To decrease the trolling speed, press the
“
” switch.
TIP:
●
The trolling speed changes approximately
50 r/min each time a switch is pressed.
●
If the trolling speed has been adjusted, the
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27821
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27847
Procedure
1. Push and hold the engine stop button or
turn the main switch to “
” (off).
1. “
” switch
2. “
” switch
6C1-9-26-1E0.book 61 ページ 2010年2月10日 水曜日 午後1時53分
Содержание F50F
Страница 13: ...General information 7 F70A 3 1 2 ZMU07077 6C1 9 26 1E0 book 7 ページ 2010年2月10日 水曜日 午後1時53分 ...
Страница 86: ...Maintenance 80 F50FEHT F60CEHT ZMU05103 6C1 9 26 1E0 book 80 ページ 2010年2月10日 水曜日 午後1時53分 ...
Страница 87: ...Maintenance 81 F70AET ZMU07089 6C1 9 26 1E0 book 81 ページ 2010年2月10日 水曜日 午後1時53分 ...
Страница 109: ...6C1 9 26 1E0 book 103 ページ 2010年2月10日 水曜日 午後1時53分 ...