Yamaha DM 1000, Руководство по обслуживанию

Страница: 124 / 307

DM1000/MB1000/SP1000
124
3. Audio Check
CAUTION!
Be sure to press the [END] button to complete the
Audio Check.
If the [END] button is not pressed and
the power is turned OFF, the current memory data of
the unit will be erased and the unit will not return to the
condition before the check.
However, if the current memory data: Scene Memory,
Input Patch Library, Output Patch Library, Surround
Monitor Library, and Automix are saved before starting
the Audio Check, this data can be recovered but other
data must be reset.
3-1. Outline
Execute the Audio Check for DM1000.
Check method
Insert the voice signal in the ANALOG, SLOT, and
2TR Digital input, select INPUT CH 1 to 48, and
check the headphone output. If the voice signal input
is not correctly output, the LSI on the selected signal
route is faulty.
Because the built-in oscillator (1 kHz/-20 dB, sine
wave) is output to BUS 1 to 8 and AUX 1 to 8, select
BUS 1 to 8 and AUX 1 to 8 and check ANALOG,
SLOT, and 2TR Digital output set in the OUT PORT.
If the sine wave is not correctly output, the LSI on
the selected signal route is faulty.
Operation method
Keys on the panel used for the Audio Check
Startup method
While pressing the [AUX SELECT DISPLAY] and
[AUX5] keys, turn the power ON.
Limits
• Possible operation keys are for the DATA ENTRY
SECTION only.
• Parameters cannot be changed according to
communication.
• LED displayed on the panel is for the STEREO
METER only.
• FADER is not effective.
• Fixed parameters:
• INPUT
•
BUS/AUX/STEREO OUT are all set to
nominal levels.
• Oscillator is output to all BUS/AUX.
• The output of the Oscillator STEREO is OFF.
• Oscillator waveform is set to 1 kHz.
• Oscillator output is set to –20 dB.
[ ], [ ], [ ], [ ] keys:
Used to move the cursor
[WHEEL]:
Used for the route display selection
and to move the cursor of the
INPUT BUS/AUX button.
[ENTER] key:
Used to determine the selection and ON/OFF
Screen explanation
MODE
CLOCK
FS
END
INPUT button
IC number
INPUT route
IC input PIN number
IC output PIN number
OUTPUT route
DM1000 Audio Check
MODE
INPUT
ANALOG
17
33
1
18
34
2
19
35
3
20
36
4
21
37
5
22
38
6
23
39
7
24
40
8
25
41
9
26
42
10
27
43
11
28
44
12
29
45
13
30
46
14
31
47
15
32
48
16
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
SLOT1
CH1
BUS1
IN PORT
ADC
BUS AUX
DSP7-1
IC103 IC201
16, 17 9 66 135
DSP7-2
IC202
128 135
DSP7-3
IC203
128 135
DSP7-4
IC204
128 135
DSP7-5
IC205
99 136
DSP7-5
IC205
1kHz 134
DSP7-6
IC206
71 134
DSP7-5
IC205
105 109
DAC
OUTPUT
OMNI 1
IC103
6 22, 23
DSP7-6
IC206
75 140 PHONE
INPUT1
SLOT2 2TRD INT 48k INT 48k END
CLOCK FS
(c) YAMAHA2003
BUS, AUX
buttons
INPUT
route display
selection
OUTPUT
route display
selection