Yamaha DM 1000, Руководство по обслуживанию

Страница: 120 / 307

DM1000/MB1000/SP1000
120
1-32. METER SW test
Contents: Check that the corresponding LEDs light/
tur n off when the MB1000 SWs are
pressed.
Example of execution screen
The SWs and the corresponding LEDs are as follows:
1-98. MESSAGE LOG
Contents: The log of the check results is displayed.
Example of execution screen
Press the [ ] key to display the next page and press the
[ ] key to display the previous page.
Press the [ENTER] key to exit this page.
A maximum of 999 pages can be displayed in the log of
the check results. Any additional pages will not be
displayed.
To clear the log, end the Service Check Program or press
the [CLEAR] key of the SOLO.
Example of execution screen
1-31. METER LED test
Contents: Visually check that the 7-segment LEDs
and MB1000 LEDs light in the specified
order.
Example of execution screen
The lighting orders are as follows:
1) Channel bar graph lighting
(LED lighting order: CH1 Lower
→
Upper.. CH 16
Lower
→
Upper, OUT BUS 1 Lower
→
Upper..OUT
BUS 8 Lower
→
Upper)
2) TIME CODE lighting (repeatedly)
H10
→
H1
→
M10
→
M1
→
S10
→
S1
→
F10
→
F1
(Lighting order: 0
→
1..9
→
. [dot])
3) Other lighting
(INPUT PRE EQ
→
PRE FADER
→
POST FADER
→
OUTPUT PRE EQ
→
PRE FADER
→
POST
FADER
→
CH 1-16_L
→
CH 17-32_L
→
CH 33-
48_L
→
AUX/BUS 1-8_L
→
CH 1-16_M
→
CH 17-
32_M
→
CH 33-48_M
→
AUX/BUS 1-8_M
→
CH
1-16_R
→
CH 17-32_R
→
CH 33-48_R
→
AUX/
BUS 1-8_R
→
1-16 SW
→
17-32 SW
→
33-48 SW
→
PEAK HOLD SW
→
REMOTE 1 SW
→
REMOTE
2 SW
→
MASTER SW)
EXIT ([DEC] Key->[ENTER] Key)
--- METER LED ---
OK 1 Channel Bargraph
NG 2 Time Code
NG 3 Others
[ENTER] key to Start
OK NG
1-16
17-32
33-48
PEAK HOLD
REMOTE1
REMOTE2
MASTER
Switch LED
1-16 light/turn off
17-32 light/turn off
33-48 LED light/turn off
PEAK HOLD LED lights/turns off
REMOTE 1 LED lights/turns off
REMOTE 2 LED lights/turns off
MASTER LED lights/turns off
EXIT ([DEC] Key->[ENTER] Key)
--- METER SW ---
OK METER SW
OK NG
--- MESSAGE LOG ---
[ 2 BATT]
NG:BATT (2.56V)
[ 6 MIDI]
OK: SCI2
BACK:[UP] NEXT:[DOWN] EXIT:[ENTER] Page 2
NG lines are displayed
in reverse.
CCW ------------------- CW L > ------------------- R
D > ------------------- U
--- ENCODER (etc.) ---
NG Q
OK FREQYENCY
OK GAIN
NG MONITOR LEVEL
OK WHEEL
OK Joystick (L-R)
NG Joystick (D-U)
If the judgment is OK or NG,
the test continues with the check
of the next channel automatically.
If the Encoder does not operate,
etc., and the next channel is not
checked automatically, press the
[DEC] key. The channel becomes
NG and the test checks the next
channel.
Display for Joystick
L—>—R indicates left to
right Joystick movement.
L—<—R indicates right to
left Joystick movement.
D—>—U indicates down
to up Joystick movement.
D—<—U indicates up to
down Joystick movement.
Display for other
than Joystick