manualshive.com logo in svg

Yamaha CS1D, Руководство по эксплуатации

Yamaha CS1D - профессиональный синтезатор с живыми звуками и широким набором функций. Вы можете скачать операционное руководство бесплатно на manualshive.com для более подробной информации о использовании этого устройства. Наслаждайтесь мощным звучанием и возможностями Yamaha CS1D.

Поделиться
Скачать
background image

 

Important

 

iii

 

•

 

Do not write on the disc or affix labels to it.

 

•

 

Keep water droplets or condensation off of the label 
surface.

 

•

 

Yamaha Corporation makes no guarantee of a disc 
that is rendered unreadable due to careless handling.

 

CS1D Exclusion of Certain Responsibility

 

Manufacturer, importer, or dealer shall not be liable for any incidental damages including personal injury or any other 
damages caused by improper use or operation of the CS1D.

 

About the LCD display

 

The LCD screen built into the CS1D has the following characteristics. Please be aware that even if the following symp-
toms occur, this is not a malfunction or a defect.

 

•

 

Since the LCD display is manufactured with 
extremely delicate technology, individual pixels may 
not display correctly. (A pixel may be constantly lit or 
constantly dark.)

 

•

 

The LCD screen may be affected by changes in the 
ambient temperature.

 

•

 

Depending on the environment of use, you may 
notice unevenness in brightness or small spots.

 

•

 

Since the LCD screen uses a cold cathode tube for a 
backlight, the state of the display will gradually 
change over time.

 

Cautions when handling the track pad

 

•

 

Place your hand and arm in a relaxed, natural posi-
tion, and operate the track pad by moving your fin-
ger lightly across the surface or tapping it gently.

 

•

 

This device is designed to be operated with one fin-
ger. It will not operate in the following situations.

1) When operated by a gloved finger

2) When operated with a pen, ballpoint pen, or pen-

cil etc.

3) When operated by two or more fingers

4) When operated with an object placed on it

 

•

 

The unit may not operate correctly if water droplets 
or condensation are present on the surface, or if 
operated using a soiled or sweaty finger. If condensa-
tion occurs, dry the unit thoroughly, or wipe it dry 
before use.

 

•

 

To avoid malfunctions, please observe the following 
cautions.

1) Do not drop objects on the unit, strike it, or sub-

ject it to strong physical shock.

2) Do not spill coffee, juice, or other liquids on the 

unit.

 

•

 

Do not operate the unit with a pointed metal object 
such as a pen, since this will damage the unit.

 

•

 

If the surface becomes soiled, wipe it clean with a dry 
cloth. If the surface is severely soiled, wipe with a 
moist cloth, and dry carefully before use.

 

•

 

Do not touch the surface while the por is being 
turned on.

 

Trademarks

 

ADAT MultiChannel Optical Digital Interface is a trademark and ADAT and Alesis are registered trademarks of Alesis 
Corporation. Tascam Digital Interface is a trademark and Tascam and Teac are registered trademarks of Teac Corpora-
tion. Windows and Windows NT are trademarks of Microsoft Corporation. Compact Flash is a trademark of SanDisk 
Corporation. Yamaha is a trademark of Yamaha Corporation. All other trademarks are the property of their respective 
holders and are hereby acknowledged.

 

Copyright

 

No part of the CS1D software or this 

 

Owner’s Manual

 

 may be reproduced or distributed in any form or by any means 

without the prior written authorization of Yamaha Corporation.

© 2000 Yamaha Corporation. All rights reserved.

 

Yamaha website

 

http://www.yamaha.co.jp/product/proaudio/homeenglish

 

Yamaha manual Library

 

http://www2.yamaha.co.jp/manual/english/

Содержание CS1D























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CS1D

Bamix classic Quick Reference Manual preview
classic
Бренд: Bamix Страницы: 96
Cadac S-Type Installation & User Manual preview
S-Type
Бренд: Cadac Страницы: 74
Paramount Fitness BM30 Installation & Operation Manual preview
BM30
Бренд: Paramount Fitness Страницы: 17
VAS XL50-6GB Instruction Booklet preview
XL50-6GB
Бренд: VAS Страницы: 16
Varimixer V5A TEDDY Spare Part And Operation Manual preview
V5A TEDDY
Бренд: Varimixer Страницы: 8
Zeppelin Design Labs VPM-1 Owner'S Manual preview
VPM-1
Бренд: Zeppelin Design Labs Страницы: 28
Amersham Pharmacia Biotech M-925 Instructions Manual preview
M-925
Бренд: Amersham Pharmacia Biotech Страницы: 8
Lite-Puter LPTJUNIOR Instructions Manual preview
LPTJUNIOR
Бренд: Lite-Puter Страницы: 33
SEVERIN COMFORT MIX PLUS HM 3834 Dimensions preview
COMFORT MIX PLUS HM 3834
Бренд: SEVERIN Страницы: 1
Mission SP1-L6H User Manual preview
SP1-L6H
Бренд: Mission Страницы: 2
MadBoy REMIX-32 Owner'S Manual preview
REMIX-32
Бренд: MadBoy Страницы: 36
Grunkel AM-25 G Manual preview
AM-25 G
Бренд: Grunkel Страницы: 14
Gallet MIX712 Instruction Manual preview
MIX712
Бренд: Gallet Страницы: 20
Lithium Grim Epic Polar Boost Building Instructions preview
Epic Polar Boost
Бренд: Lithium Grim Страницы: 13
mxr SF01 Slash Octave Fuzz Manual preview
SF01 Slash Octave Fuzz
Бренд: mxr Страницы: 2
Martello My Milky Pro Instruction Manual preview
My Milky Pro
Бренд: Martello Страницы: 22
Fujitsu LAN Console Installation, Configuration And Operation preview
LAN Console
Бренд: Fujitsu Страницы: 139
Panasonic WJ-MX10 Manual preview
WJ-MX10
Бренд: Panasonic Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды