Yamaha CS1D, Руководство по эксплуатации

Страница: 499 / 630

IN DCA/MUTE functions
151
IN PATCH
IN HA/INSERT
IN EQ
IN GATE/COMP
IN DELAY
IN DCA/MUTE
PAN/ROUTING
IN CH VIEW
•
When a scene is recalled, the DCA data of Recall Safe
channels may be adjusted so that the recall safe set-
tings are consistent within DCA groups 9–12.
Also when a channel library is recalled, the data that
is recalled to the channel may be adjusted so that
DCA groups 9–12 are consistent.
4 CLEAR
These buttons clear all input channels that have been
assigned to the corresponding DCA group.
5 CUE
These buttons switch cue on/off for each DCA group.
(They are linked with the [CUE] switches of the
DCA/GROUP block of the console.) When these
buttons are on, cue will be on for all channels
assigned to the corresponding DCA group.
6 MUTE
These buttons switch muting on/off for each DCA
group.
Hint
When a MUTE button is on, the corresponding
channels will be set to the same state as when the
DCA fader is operated to lower the input level to –
∞
dB, and no signal will be sent to the buses or output
channels.
7 DCA LEVEL SET
These buttons set all DCA faders simultaneously.
•
ALL NOMINAL
When you click this button, any DCA 1–12 faders to
which an input channel is assigned (and faders to
which no channel is assigned) will move to nominal
level (0 db) position.
•
ALL MINIMUM
When you click this button, any DCA 1–12 faders to
which an input channel is assigned (and faders to
which no channel is assigned) will move to the –
∞
position.
8 DCA faders 1–12
These indicate the DCA fader levels in accordance
with the DCA groups of the console. You can also
drag the on-screen faders to change the levels. (When
you do so, the DCA faders of the console will move
accordingly.)
6 5 4
7
8