manualshive.com logo in svg

Yamaha BANSHEE YFZ350Y, Руководство пользователя, Страница: 83 / 142

Поделиться
Скачать
Yamaha BANSHEE YFZ350Y Скачать руководство пользователя страница 83

 

8-8

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU28320

 

Checking the spark plugs 

 

The spark plugs are important engine compo-
nents, which are easy to check. Since heat and de-
posits will cause any spark plug to slowly erode,
the spark plugs should be removed and checked in
accordance with the periodic maintenance and lu-
brication chart. In addition, the condition of the
spark plugs can reveal the condition of the engine.

 

To remove a spark plug

 

1. Remove the spark plug cap.

2. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool

kit.

 

To check the spark plugs

 

1. Check that the porcelain insulator around the

center electrode of each spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

2. Check that all spark plugs installed in the en-

gine have the same color.

TIP

 

If any spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-

 

1.  Spark plug cap

1

 

1.  Spark plug wrench

1

Содержание BANSHEE YFZ350Y















































































































































Отзывы:

Нет отзывов