Yamaha 2006 FZ6-S Скачать руководство пользователя

Страница: 23 / 94

INSTRUMENT AND CONTROL FUNCTIONS

3-9

1. Use the code re-registering key to

start the engine.

NOTE:

Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer
key on the same key ring! Immobilizer
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.

2. If the engine starts, turn it off, and

try starting the engine with the
standard keys.

3. If one or both of the standard keys

do not start the engine, take the
vehicle, the code re-registering

key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.

If the multi-function display indicates
any error code, note the code number,
and then have a Yamaha dealer check
the vehicle.

CAUTION:

ECA11590

If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

EAU12331

Anti-theft alarm (optional)

This model can be equipped with an
optional anti-theft alarm by a Yamaha
dealer. Contact a Yamaha dealer for
more information.

1. Error code display

U1B3E3E0.book Page 9 Friday, July 14, 2006 11:34 AM

Содержание 2006 FZ6-S































































































Результаты поиска

Содержание 2006 FZ6-S

Отзывы:

Похожие инструкции для 2006 FZ6-S

Бренды по названию

Популярные бренды

Yamaha 2006 FZ6-S, Руководство пользователя

Результаты поиска

Содержание 2006 FZ6-S

Отзывы:

Похожие инструкции для 2006 FZ6-S

Бренды по названию

Популярные бренды