![background image](http://html.mh-extra.com/html/yamaha/03dvek/03dvek_owners-manual_903152024.webp)
Monitor Page
22
03D Video Edit Suite Software—Owner’s Manual
Monitor Page
This section explains the parameters on the Monitor page shown below. Use the [VIEW]
button to locate this page.
The Monitor page allows you to monitor fader positions, which are indicated using vertical
bars. Below these are exact fader positions. If a bar is not solid, it means that the channel is
assigned as a TO channel, or not assigned to either TO or FROM. When a transition occurs,
a hollow area inside the bar increases for FROM channels, and the solid area increases for
TO channels.
Prefer. Page
This section explains the new options on the Prefer. page shown below. Use the [UTILITY]
button to locate this page.
MASTER LEVEL PROTECT—
Bus out and aux send master faders can be protected against
accidental operation by turning on the MASTER LEVEL PROTECT option. This is useful
when master levels are not adjusted regularly.
SWAP CH 9–16 <–> 17–24
—Analog inputs 9 to 16 and digital inputs 17 to 24 can be
swapped so that the analog inputs appears as channels 17 to 24 and the digital inputs appear
as channel 9 to 16. This allows that you to control signals from the digital inputs without
pressing the [MIXING LAYER] button. The word SWAP appears next to the SIGNAL
meters.
DIGITAL BUS OUTPUT DELAY
—On the regular 03D, the output delay applies only to
the analog bus outs, not the digital bus outs. With this option turned on, however, the output
delay applies to the digital bus outs as well.
LONGER OUTPUT DELAY TIME
—The LONGER OUTPUT DELAY TIME option
allows you to increase the output delay by 3,160 samples. Since the input and output delay
functions share the same memory, the maximum input delay is reduced by 3,160 samples
when this option is on. You must restart the 03D for this option to take effect.