![background image](http://html.mh-extra.com/html/yamaha/03dvek/03dvek_owners-manual_903152015.webp)
13
Quick Start
03D Video Edit Suite Software—Owner’s Manual
3
Quick Start
This chapter explains how to get up and running with the 03D Video Edit Suite software.
1. On the MIDI/HOST page, set the HOST INTERFACE to EDITOR. See
on page 14 for more information.
2. Set the TO EDITOR parameter to ENABLE. See
3. Set the FRAME TYPE (ND, DF, 25, or 24). See
4. Set the PARITY FLAG (usually EVEN, although editors such as the Ampex
5. Set the FADER MODE (ABSOLUTE or FROM-TO). See
6. Configure channels connected to stereo sources as stereo pairs, and pan
the left channel hard left and the right channel hard right.
7. If the outputs are stereo, configure them as stereo pairs.
8. On the Machine page, assign input channels to machines and set the REC
Machine Page (Cross Point Setting)
9. Make sure that channels assigned to play machines are not routed to the
Stereo bus. Only the REC machine channels should be routed to the Ste-
reo bus.
10. On the ROUTING or From-To page, assign channels to buses. See
on page 20 for more information.
11. Set the input levels.
12. Select crossfade patterns and curves. See
13. The 03D is now ready to be controlled by the editor.