System Setup
1. In the setup Menu-DVB, use arrow buttons to select “
Manual Scan Digital channels
”, and press the
“SELECT” button, as shown in the chart.
2.Press “OK” button, as shown in the right chart.
3.Use the numbers button to set the “TP Frequecy”
4.Use the and button, set the “Band wath” to “8M”, “7M” or “6M”.
5.Use the and button, set “Auto Mode”to “No” or “YES”
6.Use the and button, set “Thans Mode” to “7K”, “8K”, and set “Guard lnfor” to “1/4” , “1/8”, “1/16”
“1/32”.
7. If there is some signal displayed in “Signal Power” and “Singal Quality” items. Press“REC” key to
search program. If you can not see any signal, please check the parameter setting.
Manual Scan Digital channels
45
13
System connection for recording external signals (front panel signal )
When connecting with external signals, be sure to switch off the power source of the unit and other devices.
The connection with front panel inputs
System Connection
RECORDER FRONT
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up any connections.
DIGITAL
Vidicon
The thick side
is downward
System connection for recording external signals (rear panel signal input)
From the video input terminals, select one as desired. In terms of picture quality, CVBS stands for good,
S-VIDEO for better .
Connection using rear panel inputs
DVD Player
or
Video lnput
RF Input
Audio lnput
SCART OUTPUT
2.Press “OK” button, as shown in the right chart. User can select this menu to search the whole programs
of the default frequency range.
OPEN/CLOSE
STANDBY/ON
USB
DV
L-----AUDIO-----R
VIDEO
DVD Re HDD + DVB-T
INPUT
S-VIDEO
VIDEO
L
SL
C
L
R
VIDEO
S-VIDEO
OPTICAL
COAXIAL
AUDIO OUTPUT
5.1 CH
OUTPUT
SR
SW
R
D
IG
IT
A
L
O
U
T
P
U
T
SERVICE
SCART INPUT
SCART OUTPUT
VIDEO OUT
Y Cb/Pb Cr/Pr
DVB-T TUNER
IN
OUT
ANTENNA
IN
OUT
ANALOGUE
TUNER
ANTENNA