manualshive.com logo in svg

Yale YL-SR-320, Руководство пользователя, Страница: 5 / 20

Поделиться
Скачать
Yale YL-SR-320 Скачать руководство пользователя страница 5

5

3

Additional Accessories

External Siren EF-BX 

(SR-320, 330 & 340 kits)

WARNING

The Siren is very loud, be prepared! Take care 

not to activate the Siren tamper switch 

unnecessarily.

•    Remove the cover by unscrewing the single screw 

located on the lid. Power switch to ON position.

Smart Home Alarm Accessories:

•    Insert AA/AAA batteries (supplied). Power Switch does 

not require any battery.

1.

   Pull out the plastic tab on 

  the back of the PIR Image 

  Camera activate batteries. 

 

 

 

   

Keyfob EF-KF 

(Sold Separately)

1.

  Open the battery compartment using a coin by turning 

cover in the direction of the big arrow so the small arrow 

is next to round dot.

2.

  Insert CR2032 battery (supplied) and replace cover.

Smoke Detector EF-SD 

(Sold Separately)

1.

  Remove the cover and insert three AA batteries (supplied)

2.

  The Smoke Detector will now enter into self-calibration 

mode for 10 minutes. It will resume normal operation after 

this period.

Panic Button EF-PB 

(Sold Separately)

 Remove the cover by loosening the fixing screw and insert 

the CR2032 battery (supplied) as shown (1). Please ensure 

you observe battery polarity and insert the battery under the 

two tabs and click into place (see image on page 16)

This pet friendly accessory will activate the alarm when large

motion is detected. Ideal for homes with one small pet (less 

than 25kg). Please note when used with large pets there is 

an increased possibility of false alarms. In these scenarios 

use a Door/Window Contact to protect the area instead.

/

Away

Learn/Test

Button

LED

ale

Y

Panic/Learn button

1

Camera

Flash light

Learn/Test button

Learn: Hold for 10 seconds
Test: Hold for 1 second

Learn/Test button

Camera

Flash light

Learn: Hold for 10 seconds
Test: Hold for 1 second

PIR Image Camera SR-PC

(SR-330 & 340 Kits & 

Sold Separately)

PIR Video Camera SR-PVC

(Sold Separately)

On/Off, Test & 
Learn button

Learn: Hold for 10 seconds
Power On/Off: Press & release
Test: Press & release

Power Switch SR-PS

(SR-340 Kits & Sold Separately)

2.

 Learn: Hold for 10 seconds

  Test: Hold for 1 second

2.

  Learn: Hold for 10 seconds

  Test: Hold for 1 second

1.

  Open back of PIR Video  

 

  Camera to insert batteries. 

1.

   Learn: Hold for 10 seconds Power On/Off: 

  Press & release Test: Press & release

PET PIR Detector EF-PETPIR

 

(Sold Separately)

ale

Y

Status 

LED

Learn/Test button

Cover 

screw

Содержание YL-SR-320





















Отзывы:

Нет отзывов