manualshive.com logo in svg

Yale YL-SR-320, Руководство пользователя, Страница: 16 / 20

Поделиться
Скачать
Yale YL-SR-320 Скачать руководство пользователя страница 16

16

Key Fob Battery Change

When the battery is low the LED will glow dimly when any 

key is pressed. The battery is changed as follows:

1.

  Using a coin turn the battery cover anticlockwise to the 

unlocked position and remove cover and battery.

2.

  Insert new CR2032 coin cell battery with the + side 

uppermost.

3.

  Replace battery cover.

Press any key and check that the LED lights. If the LED 

lights the new battery installation is successful.

Key Pad Battery Change

When the battery is low the LED will flash when any key is 

pressed. The battery is changed as follows:

1.

  Ensure the system is disarmed.

2.

  Unscrew the two Key Pad case screws and remove Key 

Pad back to reveal battery.

3.

  Using a screwdriver gently lever out the old battery.

4.

  Insert new CR2032 coin cell battery with the + side 

uppermost. (See picture below).

5.

  Press battery into holder firmly with finger and thumb 

until a click is heard (see picture below).

6.

  Press a number key and check that the LED lights. If 

the LED lights the new battery installation is successful, 

screw the  Key Pad case back on and the battery 

change is complete.

Panic Button Battery Change

When the battery is low the LED will glow dimly when the 

button is pressed. The battery is changed as follows:

1.

  Loosen the bottom case screw and take button cover  

off base.

2.

 Insert the new CR2032 coin cell battery with the + side  

    uppermost (see picture below)

3.

  Replace button cover.

Press the button and check that the LED lights. If the LED 

lights the new battery installation is successful.

Smoke Detector Battery Change

When the battery is low the LED will flash accompanied by 

a low volume beep once every 30 seconds.

1.

  Rotate Smoke Detector anti-clockwise to detach from 

base bayonet fixing.

2.

  Insert new AA alkaline batteries, taking care to observe 

polarity and wait 15-20 minutes for the Smoke Detector 

to recalibrate itself, indicted by a rapidly flashing LED.

3.

  Replace Smoke Detector on base and rotate clockwise 

to lock.

4.

  Press the test button and check that the LED lights 

and the sounder chimes to confirm the new battery 

installation is successful.

IMPORTANT

Insert the battery under the two 

tabs and click into place.

Insert flat head screwdriver to 

remove battery

Battery Removal and Insertion. Door/Window Contact Key Pad and Panic 

Button

Changing the Batteries 

(cont.)

 8

Содержание YL-SR-320





















Отзывы:

Нет отзывов