manualshive.com logo in svg

Yale YL-SR-320, Руководство пользователя, Страница: 11 / 20

Поделиться
Скачать
Yale YL-SR-320 Скачать руководство пользователя страница 11

11

Manually requesting PIR Images

During an alarm, the PIR Image/Video Camera will send 

images/video to your phone. You can also manually 

request these images/video. Still images take an average 

of 15 seconds before showing on your phone, and video 

takes approximately 1 minute. Click on “image” to view 

images/videos.

Note: Up to 50 images/videos can be kept in the Yale 

Server (the oldest images/videos are automatically 

deleted to make space). Users are advised to delete 

unwanted images/videos.

Adding alert email/SMS

You can add/delete email and SMS phone numbers for 

alert during alarm condition. Only burglar events will be 

reported via SMS, while you can choose to have ALL 

events (or Burglar only) reported via email.

Hint: our report email will use the email address of: 

[email protected] Save this email address 

as your VIP (Apple iOS) or Priority (Android) email and 

assign a special ringtone to it.

Using the Key Fob (EF-KF) or  

Key Pad (EF-KP)

Away Arm & Home Arm

Press the Away Arm/Home Arm key on the Key Fob or Key 

Pad.

Disarm

Press the disarm key on the keyfob or press the disarm key 

followed by a PIN on the Key Pad.

Содержание YL-SR-320





















Отзывы:

Нет отзывов