13
About your Alarm System (Default Settings)
Using Accessories
7
To provide additional flexibility and protection you can add extra Key Fobs, Key Pads,
Panic Buttons and Smoke Detectors. These are available separately from your local
stockist.
Adding Accessories to your System
(See page 7)
Using your Key Fob
• The Key Fob can be used to Away Arm, Home Arm, and
Disarm the system using the buttons as shown.
• An emergency alarm can be activated by pressing the
emergency button for 3 seconds until LED stops flashing.
• An emergency alarm can only be stopped by using
the Key Pad.
Key Pad
Key Pad Initialisation
If you purchase a Key Pad as an extra Key Pad, you will
need to initialise it prior to use with the Smart Hub.
1
Press ‘Panic button A’ followed by factory default Key
Pad code ‘0000’.
2
The LED will now flash slowly indicating it is in test
(programming) mode.
3
Press ‘Panic button A’ followed by the ‘7’ key to set the
Key Pad into Smart Hub system mode (also known as
slave mode).
4
Quit test mode by pressing the disarm key twice. The
Key Pad code and Mode setting has been completed.
ale
Y
1 2
3
6
5
4
7 8 9
0
Panic button A
Panic button B
Disarm
HomeArm
LED
Learn button=
Press 8 and 9 together
/
Away
/
Away