Yale HSA3800 Скачать руководство пользователя страница 4

Location planning

Work out the best places to locate the devices for maximum protection. Having chosen 
the locations 

do not mount at this stage

.

4

1

Keypad remote control accessory

When used as second keypad, it is ideal

in bedrooms or at the top of a stairwell so
the ground floor can be armed when going
to bed for the night. Or, at a side or back
door for alternative entry.
• Mount at chest height for ease of use
• Designed for indoor use only
• Keypad should be accessible from a

protected entry/exit point

• Ensure that the keypad is not visible from

the outside of the premises.

Home and away mode planning

The home arming mode allows the premises to

be part armed so that no one can get inside
without warning the occupier, yet the person
already inside the house can move freely without
triggering the alarm. For example the downstairs
of a house can be armed while upstairs can be
disarmed allowing the user to go to bed without
causing an alarm. 

If this feature is to be used, then it should

be planned now, before installation.

Decide what areas can be occupied when in

home arming mode, the sensors for these areas
should be programmed to home omit; and the
sensors activated on the path to access the
control unit should be to be set to home delay as
explained in ‘Further programming’ (page 16).

Operating range

All devices must be within 30 metres of the

control unit and must not be mounted on or near
large metal objects. Avoid obvious sources of
electrical interference such as fridges and
microwave ovens.

Tamper switches

When mounting devices ensure that any

tamper switches close fully. On uneven surfaces it
may be necessary to place packing behind the
switch for reliable operation.

Extend the system

Extend the system in the future to increase

your security or as your needs change.

For example, add extra PIR detectors and 

extra door/window contacts. 

Help button accessory

The help button provides extra protection

for you and your family. When help is needed
the button can activate your alarm
immediately - even when the system is
disarmed. 
• Mount on bedroom wall or by the front

door

• Not clearly visible to an intruder
• Easily accessible
• Out of reach of children

Dummy siren

Choose a secondary position on another

external wall where the siren would be most
prominent. Mount as high as possible, out of
easy reach.

Downloaded from www.ukpanels.com

Содержание HSA3800





























Отзывы: