21
Changing/deleting telephone numbers
1
In the ‘Tel. Numbers’ display, using the arrow
keys, move the cursor to the telephone number
you wish to change.
2
Press OK.
3
Press OK to confirm you wish to change the
number.
•
Press
a
to abort and the screen returns to Tel.
Numbers List screen.
4
Enter the new telephone number.
5
Press OK.
The number entered will override the previous
entry. The display returns to the ‘Tel. Numbers’
list.
• If you wish to delete a telephone number and
leave the location empty, press OK when
reaching step 4. The location will be cleared
and the display will return to ‘Tel. Numbers’ list.
Storing alarm messages
The control unit allows you to record messages
to be relayed to the recipient that are specific to
the cause of the alarm.
Messages
Alarm messages are recorded in five separate
parts, with a total recording time of 16 seconds.
Address message
8 seconds
Burglar message
2 seconds
Fire message
2 seconds
Personal attack message
2 seconds
Medical emergency message 2 seconds
When an alarm is raised, the control unit will
dial the stored phone numbers according to
priority (A through to F). The address message will
be relayed, followed by the message specific to
the cause of the alarm. For instance an alarm
started by a smoke detector will cause the fire
message to be relayed.
Recording address message
Ideally your address message should contain
your family name, house number and street name
so that the recipient can quickly identify the
source of the message. For example: ‘Smith,
number 10, Wood Street.’
1
Enter the ‘Tel. Settings’ menu, select
‘Messages’ > ‘Record Msg’ then ‘Rec.
Address’. The display will ask for confirmation.
2
Press OK. A prompt message will be displayed
and the control unit will sound a long beep. At
this point recording starts.
3
After saying your address message, press OK.
The display will then allow you to record your
specific alarm messages.
• At any time, pressing
a
will abort recording
and the message will not be stored. The display
will return to the menu.
• The maximum length of the address message
is 8 seconds. When the 8 seconds are over,
recording will stop automatically and the
message recorded will be stored.
• When recording messages ensure you are
facing the microphone and within 30cm of the
control unit.
Recording specific part messages
After recording your address message the
display will show the specific message menu.
Select each message in turn, following the same
procedure as for recording the address message.
Ensure you are brief when recording specific
messages. For example, when recording the
burglar message: ‘Burglar, burglar’.
• The message length for each specific message
is 2 sec only.
• Specific messages have to be recorded for
specific alarms, eg fire messages for a fire
alarm, panic message for a panic alarm etc.
otherwise the wrong message might be sent.
Playing messages
1
Select ‘Play Message’ and then press OK. You
are prompted to select the appropriate
message to be played.
2
Move the cursor to select the desired message
and then press OK. The address part message
will first be played.
3
After the address part message is played
completely, the selected specific part message
is played accordingly.
4
After playing the specific part message, the
address part message is played again and starts
a new cycle. Playing the message will be
repeated for a total of 5 times, and then the
screen returns to ‘Play Selection’ menu.
•
During playing the message, pressing the
a
key will stop the playing and the screen returns
to ’Play Selection’ menu.
Changing a message
If for any reason, you want to change any part
of the recorded message, just follow the same
procedure to record a new message for that part.
The new message will override the previous one.
Downloaded from www.ukpanels.com