manualshive.com logo in svg

Yaesu VX-3E, Руководство по эксплуатации, Страница: 96 / 132

Поделиться
Скачать
Yaesu VX-3E Скачать руководство пользователя страница 96

VX-3R/E O

PERATING

 M

ANUAL

94

W

AKEUP

 F

EATURE

The Wakeup feature is similar to the Receive Battery Saver. However, it is a newer, more
advanced feature which conserves battery life by providing a longer “sleep” time than the
regular Receive battery Saver. The Wakeup feature, once engaged, operates while the trans-
ceiver is turned off (“

WAKEUP

” will appear on the LCD).

To set up the Wakeup feature:
1.

Press and hold in the [

TXPO

] key for one second to enter the Set mode.

2.

Rotate the 

DIAL

 knob to select Set Mode Item 93: 

WAKEUP

.

Note

: Do not forget to pull the 

DIAL

 knob to rotate the 

DIAL

knob.

3.

Press the [

TXPO

] key momentarily to enable adjustment of this

Set Mode Item.

4.

Rotate the 

DIAL

 knob to select the desired “sleep” duration.

5

 - 

60SEC

: (5 second/steps) Based on the selected time value,

the radio will periodically check the operating frequency which it was on
when the radio was turned off for activity. (That was in use when the
radio was turned off.) If a signal is received on the frequency strong enough
to open the Squelch, the radio will turn itself on fully. If the EAI feature
was activated when the radio was turned off, the radio also checks on the
EAI frequency (Memory Channel “

EAI

”) for activity.

EAI

:

Checks the EAI frequency (Memory Channel “

EAI

”) every 5 seconds. If a

properly-coded signal is received on the EAI frequency, the radio will
turn itself on and then automatically transmit in accordance with the set-
ting of Set Mode Item 30: 

EAI

.

OFF

:

Disables the Wakeup feature.

5.

When you have made your selection, press the 

PTT

 switch to save the new setting and

exit to normal operation.

If you wish to disable the Wakeup feature, just repeat the above procedure, rotating the

DIAL

 knob to select “

OFF

” in step 4 above.

When the radio is turned off, the Wakeup feature will be engaged,
and the “

WAKEUP

” notation will be seen on the display.

You may cancel the Wakeup feature (complete power off) tempo-
rarily by pressing the 

POWER

 switch while the Wakeup feature is

engaged.

M

ISCELLANEOUS

 S

ETTING

Содержание VX-3E





































































































































Отзывы:

Нет отзывов