Yaesu VX-3E, Руководство по эксплуатации, Страница: 60 / 132

VX-3R/E O
PERATING
M
ANUAL
58
M
EMORY
S
CANNING
Memory scanning is also easy to initiate:
1.
Set the radio to the Memory mode by pressing the [ V/M
] key, if necessary.
2. Press and hold in the [ BAND
] key for one second, and rotate the
DIAL
knob while holding in the [
BAND
]
key to select the de-
sired Memory Scan mode. Available selections are ALL CH ,
TAG1 , TAG2 , BAND , and PMS-X .
ALL CH : The scanner sweeps all Memory channels.
TAG1 : The scanner sweeps only those Memory channels with the same first digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2 : The scanner sweeps only those Memory channels with the same first and
second digits of the alpha/numeric tag as the first channel on which scanning
started.
BAND
: The scanner sweeps only those Memory channels which are memorized on
the same operating band as the first channel on which scanning started.
PMS-X
: The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. See page 61 for details.
Note : Do not forget to pull the DIAL knob to rotate the DIAL knob.
3. Release the [ BAND
] key to initiate scanning.
4. As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning accord-
ing to the Scan-Resume mode set previously. When there are no
memory channels corresponding to the selected Memory Scan
mode, the “
MS ERR ” notation will appear on the display.
5. To cancel scanning, press the
PTT
switch or [
V/M
] key.
S
CANNING