Yaesu VX-3E, Руководство по эксплуатации, Страница: 45 / 132

VX-3R/E O
PERATING
M
ANUAL
43
S
TORING
I
NDEPENDENT
T
RANSMIT
F
REQUENCIES
(
“O
DD
S
PLITS
”)
All memories can store an independent transmit frequency, for operation on repeaters with
non-standard shift. To do this:
1. Store the receive frequency using the method already described under MEMORY
STORAGE (it doesn’t matter if a repeater offset is active).
2. Turn to the desired transmit frequency, then press and hold in the [ F/W
] key for 1/2
second.
3. Within five seconds of releasing the [ F/W
] key, rotate the
DIAL knob to select the
same memory channel number as used in step “1” above.
Note
: Do not forget to pull the DIAL knob to rotate the DIAL knob.
4. Press and hold in the PTT switch, then press the [ F/W
] key once more momentarily
while holding the PTT switch in (this does not key the transmitter).
Whenever you recall a memory which contains indepen-
dently-stored transmit and receive frequencies, the
“
” indication will appear in the display.
M
EMORY
R
ECALL
1. While operating in the VFO mode, press the [ V/M
] key to enter
the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. If you press the [
F/W
] key momentarily, then rotate the
DIAL
knob, the memory chan-
nel will be selected in 10 channels per step.
4. To return to the VFO mode, press the [
V/M
] key.
You may change the step of the fast channel selection mode ([F/W] key +
DIAL knob) via Set Mode Item 51: MRFSTP. See page 116 for details.
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
M
EMORY
S
TORAGE