Yaesu VX-3E, Руководство по эксплуатации

Страница: 119 / 132

VX-3R/E O
PERATING
M
ANUAL
117
Set Mode Item 57
[
MSG.SEL
]
Function
: Programming a Message for the Message feature.
See page 70 for details.
Set Mode Item 58
[
ON TMR
]
Function
: Set the On Timer Time.
Available Values : OFF/00H.10M(00:10) 24H.00M(24:00) (10 minutes/step)
Default : OFF
The On Timer turns on the radio at the programmed time.
Set Mode Item 59
[
OPN.MSG
]
Function
: Selects the Opening Message that appears when the radio is powered on.
Available Values : OFF/DC/MSG
Default : DC
OFF: No Opening Message
DC:
DC supply voltage
MSG: Set by user. See below.
Here’s how to program the Opening Message:
1.
Select this Set Mode Item to “MSG.”
2. Press the [
V/M
] key momentarily to enable programming of the opening message. You
will notice the first character entry’s location blinking.
3. Rotate the
DIAL
knob to select the first letter/number of the message, then press the
[
V/M
] key momentarily to save the first letter/number and move on to the next charac-
ter.
Note
: Do not forget to pull the DIAL knob to rotate the DIAL knob
4. Repeat the steps 3 and 4 as necessary to complete the message (up to six characters).
5. If you make a mistake, press the [ BAND
] key to back-space the cursor; now re-enter
the correct letter/number.
6. When you have entered the desired opening message, press the [ TXPO
] key momen-
tarily to confirm the message, then press the
PTT
switch to save the settings and exit to
normal operation.
Set Mode Item 60
[
PAG.ABK
]
Function
: Enables/Disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
Available Values
: ON/OFF
Default
: OFF
Set Mode Item 61
[
PAG.CDR
]
Function
: Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
See page 34 for details.
S
ET
(
M
ENU
)
M
ODE