Yaesu VR-160, Руководство по эксплуатации, Страница: 67 / 100

VR-160 O
PERATING
M
ANUAL
65
W
AKEUP
F
EATURE
The Wakeup feature is similar to the Receive Battery Saver. However, it is a newer, more
advanced feature which conserves battery life by providing a longer “sleep” time than the
regular Receive battery Saver. The Wakeup feature, once engaged, operates while the trans-
ceiver is turned off (“
WAKEUP ” will appear on the LCD).
To set up the Wakeup feature:
1.
Press and hold in the [
BANK
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 61: WAKE UP .
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [
BANK
] key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the
DIAL
knob to select the desired “sleep” duration.
5 sec - 60 sec : (5 sec/steps) Based on the selected time value,
the radio will periodically check the operating
frequency which it was on when the radio was turned off for activity.
(That was in use when the radio was turned off.) If a signal is re-
ceived on the frequency strong enough to open the Squelch, the radio
will turn itself on fully.
OFF : Disables the Wakeup feature.
5. When you have made your selection, press and hold in the [ BANK
] key for one sec-
ond to save the new setting and exit to normal operation.
If you wish to disable the Wakeup feature, just repeat the above procedure, rotating the
DIAL
knob to select “ OFF ” in step 4 above.
When the radio is turned off, the Wakeup feature will be engaged,
and the “
WAKEUP ” notation will be seen on the display.
You may cancel the Wakeup feature (complete power off) tempo-
rarily by pressing the
POWER switch while the Wakeup feature is
engaged.
M
ISCELLANEOUS
S
ETTING