Yaesu VR-160, Руководство по эксплуатации, Страница: 39 / 100

VR-160 O
PERATING
M
ANUAL
37
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
M
ASKING
M
EMORIES
There may be situations where you want to “Mask” memories so they are not visible during
memory selection or scanning. For example, several memories used only in a city you visit
infrequently may be stored, then “Masked” until you visit that city, at which time you can
“Unmask” them for normal use (except for Memory Channel “1”).
1. Press the [ V/M
] key, if needed, to enter the “MR” (Memory Recall) mode.
2. Press and hold in the [
F/W
] key for 1/2 second, then rotate the
DIAL knob to select the memory channel to be “Masked” from
view.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ S.SCH
] key. The confirmation massage (
M-DEL?
)
will appear on the display. Press the [
F/W
] key to cancel the
Masking Memory procedure, if desired.
4. Press the [
S.SCH
] key once more. The display will revert to
memory channel #1. If you rotate the DIAL knob to the location you just “Masked,”
you will observe that it is now invisible.
To Unmask the hidden memory, repeat the above procedure. Press and hold in the [
F/W
]
key for 1/2 second, rotate the DIAL knob to select the masked memory’s number, then
press the [ S.SCH ] key to restore the memory channel’s data.
Watch out! You can manually store data over a “Masked” memory, deleting
previous data, if you’re not careful. Use the “next available memory” storage
technique to avoid over-writing a masked memory.