Yaesu VR-160, Руководство по эксплуатации, Страница: 53 / 100

VR-160 O
PERATING
M
ANUAL
51
M
EMORY
S
CANNING
S
CANNING
PMS-X : The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. See next chapter for details.
4. Press the SCAN switch briefly to initiate Preferential Memory Scanning. Only the
channels that have a blinking “ ” icon appended to the channel number will be scanned.
M
EMORY
B
ANK
S
CAN
When the Memory Bank feature is engaged, the scanner sweeps only memory channels in
the current Memory Bank. However, if the Memory Bank Link Scan feature is enabled,
you may sweep the memory channels in several Memory Banks which you have selected.
To enable the Memory Bank Link Scan feature:
1.
Press and hold in the [
BANK
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item labeled 09:
BANK NAME .
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ BANK
] key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the memory bank on which you
wish to sweep using Memory Bank Link Scan.
5. Press the [ F/M
] key briefly to append the “
” icon between
Memory Bank number and Memory Bank name, indicating this
Memory Bank will now be swept during Memory Bank Scan.
6. Repeat steps 4 and 5 above, to append the “ ” icon to any other Memory Banks you
wish to sweep.
8. Now, press and hold in the [
BAND
] key for one second to initiate the Memory Bank
Link Scan.
9. To remove a Memory Bank from the Memory Bank Link Scan, repeat steps 1 - 5
above, to delete the “
” icon from the Memory Bank number indication.