
VR-160 O
PERATING
M
ANUAL
10
B
ATTERY
C
HARGING
If the battery has never been used, or
its charge is depleted, it may be
charged by connecting the
PA-46
AC
Adapter, as shown in the illustration,
to the
EXT DC
jack.
While the battery is being charged, the
display will indicate “
CHGING
” and
the
BUSY
indicator will glow red. The
S-meter will deflect according to the
charging status.
When charging is finished, the display
will change to indicate “
CHGFUL
” and
the
BUSY
indicator will glow green.
The
PA-46
is only designed for the charging of the
VR-160
’s bat-
tery, and is not suitable for other purposes. Please be advised that the
PA-46
may contribute noise to TV and radio reception in the imme-
diate vicinity, so we do not recommend its use adjacent to such de-
vices.
Important Note:
1) Perform battery charging when the ambient temperature range
is +5 °C to +35 °C. Charging out of this range could cause
damage to the battery pack.
2) If the charge is not completed in three hours or if “CHG ERR” appears in the dis-
play, the battery may have deteriorated. Do not attempt to forcibly charge the bat-
tery, Please contact your Yaesu dealer.
3) If you do not use the VR-160 for a long time, remove the FNB-
82LI Lithium-Ion battery pack from the VR-160, as battery leak-
age could cause damage to the VR-160 and FNB-82LI.
4) When an FNB-82LI Lithium-Ion battery pack is not used for a long time, please
remove it from the transceiver. Also, while in storage, the charge will drain slightly
over time and the battery should be recharged 50 % each six months.
I
NSTALLATION
OF
A
CCESSORIES
Содержание VR-160
Страница 57: ...VR 160 OPERATING MANUAL 55 NOTE...
Страница 97: ...VR 160 OPERATING MANUAL 95 NOTE...
Страница 98: ...VR 160 OPERATING MANUAL 96 NOTE...