Yaesu VR-160, Руководство по эксплуатации, Страница: 13 / 100

VR-160 O
PERATING
M
ANUAL
11
I
NSTALLATION OF
FBA-37 A
LKALINE
B
ATTERY
C
ASE
(
OPTION
)
The optional
FBA-37
Battery Case allows operation of the
VR-160
using three “AA” size
alkaline batteries.
When installing batteries, insert the (–) end first, then press in the (+) end so the battery
snaps into place. Always replace all three batteries at the same
time, paying attention to the polarity indicated inside the case.
The FBA-37 must not be used with rechargeable cells. The FBA-
37 does not contain the thermal and over-current protection cir-
cuits (provided in the FNB-82LI Lithium-Ion Battery Pack)
required when utilizing Ni-Cd and Ni-MH cells.
Important Note:
1) The FBA-37 is designed for use only with AA-type Alka-
line cells.
2) If you do not use the VR-160 for a long time, remove the alkaline batteries from the
FBA-37, as battery leakage could cause damage to the VR-160 and FBA-37.
3) Never connect the external DC power supply to the VR-160, when the FBA-37 Bat-
tery Pack is installed in the VR-160.
B
ATTERY
L
IFE
I
NFORMATION
When the battery charge is almost depleted, a “ ” icon will blink
on the display. When the “ ” icon blinks, it is recommended that
you charge the battery soon.
I
NSTALLATION OF
A
CCESSORIES
1: Receiving Ratio (1 : 3 = RX : Squelched)
2: Continuous signal reception.
VOL Level: 10 (Factory Default)
The current battery voltage can be displayed manually on the display, via the Set Mode
Item 22:
DC VOLTAGE .
Battery capacity may be reduced during extremely cold weather operation. Keeping the
radio inside your parka may help preserve the full charge capacity.
O
PERATING
B
AND
Amateur Band 1
Broadcast Band 2
FNB-82LI
23 hours
20 hours
FBA-37
28 hours
25 hours
B
ATTERY
L
IFE
(
A
PPROX
.
)
B
ATTERY
I
NDICATOR
: Full Battery Power
: Enough Battery Power
: Lower Battery Power
: Poor Battery Power
(Blinking): Prepare to charge (or replace)
the Battery