2
Preparation Procedure
The network remote control system requires a compatible transceiver (FTDX101MP/FTDX101D as of April
2020), a Windows 8.1 or later PC that has a LAN port and audio function, Internet and a LAN network.
System Requirements
z
Supported Transceiver
• FTDX101MP/FTDX101D (as of April 2020)
z
PC
• OS : Microsoft
®
Windows
®
8.1/10 (32bit / 64bit)
• LAN Port (100BASE-TX/1000BASE-T)
• Audio interfaces (Speaker or Headphone, and Microphone)
z
Local Area Network
z
Internet connection
(Download speed: at least 2 Mbps , Upload speed: at least 1.2 M bps are recom-
mended at the PC Side)
z
Ethernet cable
Commercially available straight Ethernet cable (category 5e or higher)
z
PC Software
Download the
“
SCU-LAN10 Remote Software
”
and
“
SCU-LAN10 Setting Tool
”
from our website.
Initial settings for SCU-LAN10 and remote control software are required.
These initial settings are required only once at the first time.
Check the LAN for installing the transceiver (P.8)
Install the software on a computer (P.10)
Preparation for initial setting (P.13)
Restore the network settings of the computer (P.25)
Initial setting of FTDX101MP/D (P.28)
