Yaesu SCU-LAN10, Руководство по установке

Страница: 28 / 41

28

Initial setting of FTDX101MP/D
Set the FTDX101MP/D in advance as follows for remote control. All the following settings are required for nor-
mal remote control. Please refer to “
FTDX101MP/D setting menu operation procedure ” (Next page) for the
setting operation of FTDX101MP/D.
Settings for transmit audio
Change the transmit audio setting for each mode to
SOURCE: REAR
,
REAR SELECT: USB
.
SSB
RADIO SETTING

MODE SSB

SSB MOD SOURCE: REAR
RADIO SETTING

MODE SSB

REAR SELECT: USB
AM
RADIO SETTING

MODE AM

AM MOD SOURCE: REAR
RADIO SETTING

MODE AM

REAR SELECT: USB
FM
RADIO SETTING

MODE FM

FM MOD SOURCE: REAR
RADIO SETTING

MODE FM

REAR SELECT: USB
CAT Rate setting
Set the communication baud rate of CAT to 38400bps.
OPERATION SETTING

GENERAL

CAT RATE: 38400(bps)
CAT TIME OUT TIMER setting
Set the CAT TIME OUT TIMER setting to 10 (msec)
OPERATION SETTING

GENERAL

CAT TIME OUT TIMER: 10 (msec)
CAT RTS setting
Set the CAT RTS setting to ON.
OPERATION SETTING

GENERAL

CAT RTS: ON
VOX SELECT setting
Set VOX Select to DATA.
OPERATION SETTING

TX GENERAL

VOX SELECT: DATA
TOT (Time Out Timer) setting
It is recommended to set the transmit timeout timer function in case the transceiver remains in the transmit
state for some reason.
OPERATION SETTING

GENERAL

TX TIME OUT TIMER: 1(min) - 30(min)