Yaesu SCU-LAN10, Руководство по установке

Страница: 9 / 41

9
(2) When connecting directly with an Ethernet cable for remote control
If you connect the FTDX101MP/D and the SCU-LAN10 directly with an Ethernet cable without using a
router in the same building, you do not need to check the network environment.
Proceed to “

Install the software on a computer ” (next page).
SCU-LAN10 Remote control PC
LAN
LAN
(3) Remote control within the same LAN using a router
When connecting in the same LAN environment using a router such as in a house, check the following
three items with reference to the figure.
Router
SCU-LAN10
Other network device
IP address

Remote control PC
IP address of the router

Subnet mask


IP address of LAN side of the router
Example:192.168.0.1, etc

Subnet mask
Example: 255.255.255.0, 255.255.0.0, etc

IP addresses of other devices (other computers, network cameras, etc.) connected to the same router*
Example: 192.168.0.2, 192.168.0.3, etc
*Sharing the network with other devices may cause remote control or audio delay, so it is recommended
that you do not connect other devices as much as possible.