Yaesu SCU-LAN10, Руководство по установке

Страница: 22 / 41

22
(3) Remote control within the same LAN using a router
Router
SCU-LAN10
Other network device
IP address

Remote control PC
IP address of the router

Subnet mask

Set according to the following network environment confirmed in “

Check the LAN for installing the trans-
ceiver ”.

IP address of LAN side of the router

Subnet mask

IP addresses of other devices (other computers, network cameras, etc.) connected to the same router
(1) Set the “IP Address”
• Set an IP address other than (1) IP address of router and (3) IP address other than network device.
• If the subnet mask is
“ 255.255.255.0 ” , the IP address range from “ 192.168.xxx.2 ” to “ 192.168.xxx.254 ”
can be used, but the range of IP address that may be automatically set by the DHCP function of the
router. It is recommended to leave it outside. For general routers, we recommend setting the IP address
in the range of
“ 192.168.xxx.65 ” to “ 192.168.xxx.254 ” .
Example: 192.168.0.100
(2) Set the “Subnet Mask”
Set the same as the confirmed “

Subnet mask ”.
Example: 255.255.255.0 , 255.255.0.0
(3) Set “Default Gateway” (only when using a router)
Set the same IP address as the one you have checked “

Router IP address
”.
Example: 192.168.0.1

Normally you do not need to change the “
Control Port
”. If it conflicts with other software, it can be
changed within the range of 49990 to 50009. (Factory setting: 50000)
9. Click [ Apply ] to save settings.
The confirmation screen will be displayed.