Yaesu SCU-LAN10, Руководство по установке

Страница: 34 / 41

34
(1) Login Account settings
User : Enter the User that is set for SCU-LAN10.
Password : Enter the password that is set for SCU-LAN10.
(2) Network settings
Remote Address : Enter the remote address to connect to SCU-LAN10.
The settings differ depending on the network environment as follows:
When using the Internet
For fixed global IP: Enter the fixed IP address obtained from the provider
For dynamic DNS service: Enter the acquired domain name
When using a local LAN
Enter the IP address set for SCU-LAN10
Example: 198.168.0.100
Normally, other setting items do not need to be changed.
3. After completing the settings, click the [
OK
] button.
The connection settings are complete.
About setting items
Transceiver
Select the transceiver to connect. Only “
FTDX101
” can be selected. (As of April
2020)
Login Account
User
See above for details.
Password
See above for details.
Network
Address
See above for details.
Control Port
PORT number used for remote control. It can be set in the range of 49990 to 50009.
(Default setting: 50000) Normally, it does not need to be changed.
If you set another port number with the setting software in the initial setting, you need to set
the same port number.
CAT Port
PORT number used for remote control. It can be set in the range of 49990 to 50009.
(Default setting: 50001) Normally, it does not need to be changed.
Audio Port
PORT number used for remote control. It can be set in the range of 49990 to 50009.
(Default setting: 50002) Normally, it does not need to be changed.
Scope Port
PORT number used for remote control. It can be set in the range of 49990 to 50009.
(Default setting: 50003) Normally, it is not need to be changed this.
Audio Quality
Select the audio format sampling rate to use for transmission. (Default setting:
PCM (16kHz)) Normally, there is no need to change this. Depending on the line
status, changing the setting may stabilize the voice quality.
PCM(16kHz), PCM(8kHz), μ-Law(16kHz), μ-Law(8kHz)
μ-Law is a compressed format.
Audio Send Buffer Size
Select the transmission buffer size of the audio transmitted from the transceiver.
(Default setting: 200 (msec)) Normally, it is not necessary to change this. Depend-
ing on the line status, changing the setting may stabilize the voice quality.
Audio Recv Buffer Size
Select the audio buffer size for the audio received by the transceiver. (Default set -
ting: 100 (msec)) Normally, it is not necessary to change this. Depending on the line
status, changing the setting may stabilize the voice quality