31
Remote connection
Install the SCU-LAN10 and FTDX101MP/D
Install the SCU-LAN10 and FTDX101MP/D according to the network environment of the installation location
referring to the diagram.
1. Turn the transceiver
OFF
.
2. Connect the SCU-LAN10 to a router or computer with a commercially available straight LAN cable.
3. Connect the SCU-LAN10 and FTDX101MP/D with the included ACC cable and USB cable.
Attach the two included ferrite cores to the bases of the connectors on both ends of the ACC cable using
the cable ties (accessory).
(1) Connection diagram for remote control via the Internet
ANT 1
ANT 2
EXT SPKR
KEY
ACC
TUNER
PTT
METER
GND
LINEAR
+13.8V
REM
EXT ALC
RS-232C
A
B
WAN
Modem
LAN
Router
Internet
Commercially available
straight Ethernet cable
LAN
ACC
ACC
Use the cable ties (accessories) to secure the
two ferrite cores (accessories) to the bases of
the plugs on both ends of the ACC cable.
