Yaesu FTM-500DR Скачать руководство пользователя страница 83

Страница: 83 / 84

EU Declaration of Conformity

We, Yaesu Musen Co. Ltd of Tokyo, Japan, hereby declare that this radio equipment FTM-500DE

is in full compliance with EU Radio Equipment Directive 2014/53/EU. The full text of the Declaration

of Conformity for this product is available to view at http://www.yaesu.com/jp/red

ATTENTION – Condition of use

This transceiver operates on frequencies that

are regulated. Use of the Transmitter in the EU

countries shown in the accompanying table is not

permitted without authorization. Users should con-

sult their local spectrum management authority for

licensing conditions applicable to this equipment.

–

Disposal of Electronic and Electrical Equipment

Products with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

Electronic and Electrical Equipment should be recycled at a facility capable of

handling these items and their waste by-products.

Please contact a local equipment supplier representative or service center for

information about the waste collection system in your country.

Declaration of Conformity

Type of Equipment:

144/430MHz Digital/Analog Transceiver

Brand Name:

YAESU

Model Number:

FTM-500DR

Manufacturer:

YAESU MUSEN CO., LTD.

Address of Manufacturer: Omori Bellport Building D-3F

6-26-3 Minami-Oi, Shinagawa-ku, Tokyo, 140-0013, Japan

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions; (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.
The technical documentation as required by the Conformity Assessment procedures is

kept at the following address:
Company: Yaesu U.S.A.

Address: 6125 Phyllis Drive, Cypress, CA 90630, U.S.A.

Telephone: (714) 827-7600

UKCA Declaration of Conformity

We, Yaesu Musen Co. Ltd of Tokyo, Japan declare our sole responsibility that this equipment com-

plies with essential requirements of the Radio Equipment Regulations 2017, Electrical Equipment

(Safety Regulations 2016), Electromagnetic Compliance Regulations 2016 and Restrictions of the

use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as

appropriate.

Содержание FTM-500DR





















































































Результаты поиска

Содержание FTM-500DR

Отзывы:

Похожие инструкции для FTM-500DR

Бренды по названию

Популярные бренды

Yaesu FTM-500DR, Руководство по эксплуатации

Результаты поиска

Содержание FTM-500DR

Отзывы:

Похожие инструкции для FTM-500DR

Бренды по названию

Популярные бренды