9
PMG (Primary Memory Group) .............................................. page 14
The PMG function that displays the receive status of registered channels in a bar
graph allows registration of up to 5 channels by pressing and holding the
key
for the current display frequency of either the VFO or the memory channel. The PMG
screen can be switched to auto mode or manual mode by press and hold the
DIAL
knob.
PMG channels are continuously scanned in auto mode. If a signal is received on
other than the current channel, the frequency will automatically blink and dual re-
ceive will occur. When the signal disappears or the screen is touched, PMG scan-
ning resumes. When operating on a blinking frequency (channel), touch and hold
the blinking frequency to switch it to the operating channel
Current Frequency
(VFO or Memory Channel)
PMG Screen
(Auto Mode)
to call up
Press the
[PMG
PW
] key
to return
Auto mode scans and receives simultaneously
on channels with signals.
z
Register the frequency to PMG
Display the frequency of the VFO or memory
channel, then press and hold the
key.
The frequency is registered in PMG.
z
Display the PMG screen
Press the
key to display the PMG
screen.
Press and hold the
DIAL
knob to switch
between Auto Mode and Manual Mode.
Auto Mode:
Scan and receive simultaneously on chan-
nels with signals.
When there is no signal, scanning is re-
sumed and the receive status is displayed in
real time.
Manual Mode:
It is fixed to the channel selected by the
DIAL
knob, and when there is a signal, the
received audio is output.
When there is no signal on the selected
channel, it scans and displays the receive
status of other channels in real time. (Even
if there is a signal on another channel, the
received audio is not output.)
DIGITAL / ANALOG TRANSCEIVER
FTM - 500D
DISP
S-DX
Press and hold:
Register
DIGITAL / ANALOG TRANSCEIVER
FTM - 500D
DISP
S-DX
Press:
Recall or exit PMG
Rotate the
FUNC
knob to select
Press and hold the
DIAL
knob to switch
Auto Mode / Manual Mode
DIGITAL / ANALOG TRANSCEIVER
FTM - 500D
DISP
S-DX
Press and hold:
Unregister
z
Cancel the frequency registered in PMG
Select a channel on the PMG screen
and press and hold the
key.
