Yaesu FTM-500DR, Руководство по эксплуатации

Страница: 53 / 84

51
Split Memory
Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
1. Register the receive frequency to a memory channel first.
For additional details on registering to a memory channel, refer to page 44.
To edit a memory channel that has already been written, go to step 2.
2. Press and hold the key.
The memory channel list appears.
The memory channel list can also be displayed by the following operations:
Press the FUNC knob

Touch [ KEYPAD ]

Select [ MEMORY CH LIST ]

Press the
FUNC knob
3. Rotate the
FUNC
knob to select the channel number that the receive frequency was
registered to on step1, and press the FUNC knob.
4. Touch [ EDIT ].
Or rotate the
FUNC
knob to select [
EDIT
], then press
the FUNC knob.
024 DIGITAL
433.100
433.200
433.300 JA1YOE
022 433.620 FTM-500D
021 433.300 YAESU
023
MEMORY CH LIST
5. Touch [ TX FREQ ].
Or rotate the FUNC knob to select [ TX FREQ ], then
press the FUNC knob.
TX FREQ
>
RX FREQ
TAG
SCAN
OK BACK
MEMORY INFORMATION
433.340
|||
.
|||
YES
YAESU
6. Set the transceiver to the desired transmit frequency.
7. Touch [
OK
].
Or rotate the FUNC knob to select [ OK ], then press the FUNC knob.
8. Confirmation screen is displayed, touch [ OK ] or press
the FUNC knob.
The display returns to the memory channel list screen,
and the receive frequency is displayed on the upper
side, and the transmit frequency is displayed on the
lower side.
024 DIGITAL
433.100
433.200
433.300 JA1YOE
022 433.620 FTM-500D
021 YAESU
023
433.340
145.720
MEMORY CH LIST
9. Press the DIA L knob, SUB DIAL knob or PTT switch
to save the settings and return to normal operation.
When recalling the split memory “ ” is displayed on
the LCD.
While operating the split memory, to reverse the transmit and receive frequencies temporarily:
Press the FUNC knob → [ RPT-R ]
When reversing the frequencies, “ ” will blink.